Product ID:MAX-ABRADE SD ELECTRODE, 17610250
MSDS Date:08/27/1997
FSC:3439
NIIN:00N085634
MSDS Number: CHCQY

X-ERGON, PARTSMASTER DIV NCH CORP

IRVING, TX 75015
US

Emergency Phone: 972-438-1381

Info Phone: 972-438-1381

Preparer: B ABBOTT

Cage: JO676

X-ERGON, PARTSMASTER DIV NCH CORP

152170 IRVING, TX 75015 US

Telephone: 972-438-1381

Cage: JO676

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST

SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

(ORAL,RAT) 30 G/KG

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL N/K

ACGIH TLV: N/K

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.

CARBON

CAS: 7440-44-0

RTECS: FF5250100

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST

BORON

CAS: 7440-42-8

RTECS: ED7350000

OSHA PEL 10 MG B203/M3

ACGIH TLV: 10 MG B2O3/M3

(ORAL,RAT) 6450 MG/KG

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

PHENOL FORMALDEHYDE RESIN; (PHENYL FORMALDEHYDE)

CAS: 9003-35-4

OSHA PEL N/K

ACGIH TLV: N/K

FELDSPAR; (POTASSIUM FELDSPAR)

CAS: 68476-25-5

OSHA PEL 2 MG/KG (MFR)

ACGIH TLV: 10 MG/KG (MFR)

(ORAL,RAT) 4250 MG/KG

CAS: 7782-42-5

RTECS: MD9659600

OSHA PEL 15 MPPCF; Z-3

ACGIH TLV: 2 MG/M3 RDUST

SILICA, CRYSTALLINE - QUARTZ; (SILICA, QUARTZ)

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST

VANADIUM (SARA 313)

CAS: 7440-62-2

RTECS: YW1355000

OSHA PEL N/K

ACGIH TLV: N/K

FORMALDEHYDE (SARA 302/313) (CERCLA)

CAS: 50-00-0

RTECS: LP8925000

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM, A2

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

WELDERS HEAD IN RELATION TO FUME PLUME & PRESENCE

RTECS: 9999999ZZ

DECOMP PRODS GENERATED ARE DIFFERENT IN PERCENT &

RTECS: 9999999ZZ

INCL THOSE ORIGINATING FROM VOLITALIZATION

RTECS: 9999999ZZ

OVEREXP TO WELDING FUMES CAN LEAD

RTECS: 9999999ZZ

LUNGS. FOR MORE

RTECS: 9999999ZZ

GIVE FLUIDS AGAIN. GET IMMED MEDICAL

RTECS: 9999999ZZ

OR PROD IS USED & LBLD FOR FACILITY GROUNDS

RTECS: 9999999ZZ

IS USED & LABELED FOR MAINTAINING MOTOR VEHICLES.

RTECS: 9999999ZZ

CHEM(S) KNOWN TO STATE OF CALIFORNIA TO CAUSE (1)

RTECS: 9999999ZZ

QUARTZ (1), CHROMIUM (1).

RTECS: 9999999ZZ

TRAIN WELDOR TO KEEP HEAD OUT OF FUMES.

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENTS 4, 8, & 11
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE: EYES: FUMES & GASES MAY CAUSE
IRRIT TO EYES. ARC RAYS CAN BURN/INJURE EYES. SKIN: ARC RAYS CAN
BURN/INJURE SKIN. INHAL: FUMES & GASES MAY CAUSE DIZZ, NAUS,
DRYNESS/IRRIT OF NOSE & THROAT. ELEC SHOCK CAN KILL. OVEREXP TO
MANGANESE CMPDS MAY AFFECT CNS. SYMPS INCL MUSCULAR WEAK & TREMORS
SIMILAR (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC MONO,
VOL 68, 1997: GROUP 1. NTP 7TH ANNUAL RPT ON CARCIN, 1994: ANTIC TO
BE (SUPDAT)
Effects of Overexposure:EFTS OF OVEREXP: TO PARKINSON'S. TOX INFO:
WELDING & BRAZING FUMES CANNOT BE CLASSIFIED SIMPLY. COMPOSITION &
QTY ARE DEPENDENT ON METAL BEING WELDING, PROCESS, PROC, & FILLER
METALS USED. OTHER CNDTN S INFLUENCING COMPOSITION & QTY OF FUMES &
GASES THAT WORKERS MAY BE EXPOS TO INCL: COATINGS ON WELDED METAL,
(SUPDAT)
Medical Cond Aggravated by Exposure:MAY AGGRAVATE INDIVIDUALS WITH
EXISTING RESPIRATORY OR ALLERGIC CONDITIONS.

First Aid:INHAL: REMOVE TO FRESH AIR. SEEK MED ATTN IF RESP IRRIT
DEVELOPS/IF BRTHG BECOMES DFCLT. EYE: RINSE W/WATER. REMOVE ANY
CONT LENSES & CONTINUE FLUSHING W/PLENTY OF WATER FOR @ LST 15
MINS. SEEK MED AT TN IF IRRIT DEVELOPS. SKIN: WASH AREAS W/PLENTY
OF SOAP & WATER FOR SEVERAL MINS. SEEK MED ATTN IF IRRIT DEVELOPS.
INGEST: GIVE 3-4 GLASSES OF WATER, BUT DO NOT INDUCE VOMIT. IF
VOMIT OCCURS (ING 20)

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:NIOSH APPRVD SCBA & FULL PROT EQUIP . DO NOT
USE WATER ON MOLTEN METAL, AS HAZ METAL FUMES MAY BE PRODUCED. USE
WATER ON SOLID METAL TO KEEP IT (SUPDAT)
Unusual Fire/Explosion Hazard:WELDING ARC & SPKS CAN IGNITE
COMBUST/FLAMM MATLS. REFER TO AMERICAN NATIONAL STANDARD 149.1, FOR
FIRE PREVENTION DURING WELDING PROCEDURES.

Spill Release Procedures:PICK UP PRODUCT. SWEEP AND MOP AREA AS
REQUIRED.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:DO NOT TOUCH LIVE ELECTRICAL PARTS.
INSULATE FROM WORK AND GROUND. READ THE ENTIRE LABEL BEFORE USING
THIS PRODUCT. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:WEAR HEAD, HAND & BODY PROT WHICH HELPS TO PVNT
INJURY FROM RADIA, SPKS & ELEC SHOCK. IF UE (USE EMEMPTION) APPEARS
UNDER UPPER % LIMIT, END USERS ARE EXEMPT FROM NOTIFICATION BECAUSE
PROD IS USED & L BLD FOR ROUTINE JANITORIAL WORK,(ING 21)

Respiratory Protection:USE NIOSH APPRVD OR EQUIVALENT FUME RESPIRATOR
OR AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE, OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHAUST AT ARC/BOTH TO KEEP FUMES &
GASES BELOW TLV'S IN WORKERS BRTHG ZONE & GEN AREA. (ING 25)
Protective Gloves:WELDING GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
WELDING PROTECTIVE CLOTHING. ALL SKIN AREA SHOULD BE COVERED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: COOL IN FIRE SITUATIONS. EXPLAN OF CARCIN: CARCIN.
FORMALDEHYDE: IARC MONO. SUPP, VOL 7, PG 211, 1987: GROUP 2A. NTP
7TH ANNUAL RPT ON CARCINS, 1994: ANTIC TO BE CARCIN. OSHA REGULATE
D CFR 29 1910.1048. EFTS OF OVEREXP: NUMBER OF WELDERS & VOL OF
WORK AREA. QTY OF AMT OF VENT, POSITION OF (ING 15)

Solubility in Water:INSOLUBLE
Appearance and Odor:OPAQUE, MAROON FLUX COATED SOLID METAL. NO ODOR.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:FLUORIDES, COMPLEX OXIDES OF METALS.
OXIDES OF CARBON AND NITROGEN, AND OZONE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WTIH ALL FEDERAL, STATE
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.